Care And Cleaning; Technical Data; Power Supply - Renkforce RF-PCL-MESH2.0 Mode D'emploi

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Technical data

a) Speaker
Input voltage . ................................ 220–230 V/AC, 50 Hz
Audio input (PC) ........................... 3.5 mm jack (stereo)
Audio output (headphones) .......... 3.5 mm jack (stereo)
Output power . ............................... 5 W (RMS)
Frequency range .......................... 80–19,000 Hz
Tweeter . ........................................ 2.5", 4 Ω, 3 W
Cable length ................................. 1.2 m
Operating/storage conditions . ....... - 20 to +60 ºC, <80 %
relative humidity (non-condensing)
Dimensions (L x W x H) . ............... 90 x 80 x 156 mm
Weight .......................................... 900 g
b) Power supply
Input voltage/current . .................... 100–240 V/AC, 50/60 Hz, 0.3 A
Output voltage/current . ................. 5 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1576989_v1_0917_02_DS_m_4L_(1)