Renkforce RF-PCL-MESH2.0 Mode D'emploi page 3

Operating instructions
PC speaker RF-PCL-MESH2.0
Item no. 1576989
Intended use
This product is designed to play sound from audio systems (e.g. a sound card). The speakers
must only be connected to a low-level audio output on audio devices.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• PC speakers (pair)
• Power supply (5V / 1 A)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may result in a fatal electric shock!
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• Never touch or operate the product if your hands are moist or wet. This may result
in a fatal electric shock!
• Never pour any liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product, and the
power adapter may cause a fatal electric shock. Allow the product to reach room
temperature before connecting it and putting it to use. This may take several
hours.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the socket to which
the power adapter is connected (switch off at the corresponding circuit breaker or
remove the safety fuse, and then switch off at the corresponding RCD protective
switch). You can then unplug the power adapter from the mains socket. Dispose
of the faulty power adapter in an environmentally friendly manner and discontinue
use. Replace it with a power adapter of the same design.
• The mains outlet must be located near to the device and be easily accessible.
• Always power the product using the power adapter provided.
• Only connect the power adapter to a standard mains socket connected to the
public grid. Before plugging in the power adapter, check that the voltage stated on
the power adapter is the same as the voltage of your electricity supplier.
• Never connect or disconnect the power adapter when your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This may cause an injury.
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
c) Persons and product
• Do not listen to excessively loud music over an extended period of time, as this
can cause hearing damage.
Product overview
1
2
3
Choosing a suitable setup location
• Do not expose the speakers to direct sunlight, vibrations, dust, hot and cold temperatures
or damp environments. The speakers must not be placed next to powerful transformers or
motors.
• Place the speakers on a stable surface.
Operation
• Turn the volume control (2) on the front of the right speaker anticlockwise until it clicks into
place in the "Off" position.
• Plug the 3.5 mm audio cable on the right speaker into the 3.5 mm jack socket on an audio
device (e.g. PC sound card).
• Insert the connector on the power adapter to the power-in socket (4) on the right speaker.
• Connect the power adapter to a standard mains socket or extension socket.
• Turn the volume control (2) clockwise to turn on the speakers. The LED indicator (3) will
turn green.
• Adjust the volume as desired (clockwise to increase the volume or anticlockwise to decrease
the volume).
1 Speaker
2 Volume control
3 LED indicator
4 Power-in socket
4