To Remove The Discharge Grille, And Put The Grille In Safety Position; Starting Up The Outdoor Unit - Daikin Altherma 3 H MT EPRA08EAV3 Manuel D'installation

7.3 To remove the discharge grille, and
put the grille in safety position
WARNING
Rotating fan. Before powering ON or servicing the outdoor
unit, make sure that the discharge grille covers the fan as
protection against a rotating fan. See:
▪ "7.2 To install the discharge
▪ "7.3 To remove the discharge grille, and put the grille in
position" [ 4 17]
safety
1 Remove the upper part of the discharge grille.
4×
2 Remove the lower part of the discharge grille.
4×
3 Rotate the lower part of the discharge grille.
4 Align the ball stud and hook on the grille with their counterparts
on the unit.
EPRA08~12EAV3+W1
Daikin Altherma 3 H MT
4P634882-1B – 2021.09
grille" [ 4 16]

8 Starting up the outdoor unit

5 Insert the hook.
6 Insert the ball stud.
8 Starting up the outdoor unit
See the indoor unit installation manual for configuration and
commissioning of the system.
WARNING
Rotating fan. Before powering ON or servicing the outdoor
unit, make sure that the discharge grille covers the fan as
protection against a rotating fan. See:
▪ "7.2 To install the discharge
▪ "7.3 To remove the discharge grille, and put the grille in
position" [ 4 17]
safety
5
6
grille" [ 4 16]
Installation manual
17