Kemper Frosti-Plus 574 Instructions De Montage page 3

EN
Precautions for preliminary installation
Installation
Read the manual and follow the
instructions before installation!
Installation and maintenance must be carried out by
qualified plumbers.
Keep the manual for future reference!
Do not combine components of Figure 574
with parts from earlier versions.
The place of installation may not be
at risk of flooding.
Perform a leak test after installation and before
commissioning!
Priority must be given to the national standards and
provisions on sanitary installations and accident
prevention.
All dimension specifications are given in mm.
Warranty
Warranty or liability are voided through:
- Disregard of installation instructions.
- Damage due to faulty installation.
- Unauthorised product modifications.
- Other incorrect operation.
Use
The KEMPER FROSTI®-PLUS is used
as a frost-proof outdoor tap.
Do not use the product for other
purposes than described above.
Any other uses constitute misuse.
Warnings
Be sure to read and follow the warnings in the
manual. Failing to do so can lead to personal injury
or material damage!
Important warnings:
Warning! Highlights risks that may
result in injury, material damage or
contamination of drinking water.
Note! Highlights risks that may result in
damage to the plant or dysfunction.
Drinking water installation
In order to prevent stagnation and bacterial conta-
mination in the supply, it is recommended to loop
the tap in w the drinking water system.
* For technical reasons, it is necessary to execute
the last min. 100 mm as a functional individual
supply line.
** The tap must be installed at least 250 mm
above the maximum Fluid level.
DIN EN 1717
DIN 1988-100
© www.kemper-group.com – 09.2022 / K410057400001-00 – 3 /16
max.