Hotpoint Ariston HA70BI 52 X Guide Rapide page 2

ACCESSORIES
BOTTLE RACK
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait at
least 4-6 hours before placing food into the fridge and into
the freezer compartment.
DAILY USE
FUNCTIONS
FREEZER OPERATION BUTTON
To regulate the temperature the freezer compartment.
Button is used with SUPER FREEZE Button
switch off the product
by pressing both 3 seconds.
FREEZER TEMPERATURE
To adjust the Freezer Temperature, press the Freezer
Operation °C button. The Freezer Temperature can be
adjusted between -18°C and -26°C, as shown by the Freezer
Temperature LEDs.
SUPER FREEZE
The use of this function is recommended when placing a very
high quantity of food to be frozen in the freezer compartment.
Press the SUPER FREEZE button to enable or disable the
function. When the Super Freeze function activated, blue light
illuminates on the freezer display. After 24 hours place the
food to be frozen in the upper basket of freezer compartment.
The function is automatically disabled after 48 hours, or can be
manually disabled by pressing Super Freeze °C button.
FRIDGE TEMPERATURE
To adjust the Fridge Temperature, press the Fridge Operation
°C button. The Fridge Temperature can be adjusted between
+2°C and +8°C, as shown by the Fridge Temperature LEDs.
SPEED COOL
Using Speed Cool function it is possible to increase the
cooling in the refrigerator compartment. The use of this
function is recommended when placing a very high quantity
of food in the refrigerator compartment. Press the Speed cool
button to activate Speed Cool function. When speed cooling
function is activated, blue light illuminates on the refrigerator
display. The function is automatically disabled after 6 hours, or
can be manually disabled by pressing Speed cool button.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge - freezer compartment settings light-up.
See Use and Care Guide for more details on functions / see last
page for information on how to obtain the Use and Care Guide
to switch on/
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.If the LED light system does not work,
please contact the Service to replace it.
SMART DISPLAY
This optional function can be used to save energy. To activate
the Smart Display, press
at the same time for 3 seconds until an audible signal sounds.
To deactivate this function repeat the same procedure.
Remember that this function does not disconnect the
appliance from the power supply, but only reduce the power
consumed by external display.
TEMPERATURE INDICATOR *
Temperature indicator informs you if the temperature in this
cavity is cold enough for storage with the word "OK".
1. Check that OK appears clearly on the indicator light (see
2. If the word "OK" does not appear it means that the
3. Check the indicator light again: if necessary, readjust it
Fridge °C and
the picture below).
temperature is too high: set a lower temperature and wait
approximately 10 hours until the temperature has been
stabilised.
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK.
Freezer °C buttons