Hella Gutmann MT-HV Notice D'utilisation page 46

Putting Into Operation
Connecting the MT-HV with the mega macs X
5 Putting Into Operation
This section describes how to connect the MT-HV with the mega macs X.
EN
5.1 Connecting the MT-HV with the mega macs X
Initial setup:
Proceed as follows to connect the MT-HV with the mega macs X for the first time:
1. Connect the MT-HV with the supplied USB-C cable to the mega macs X.
The mega macs X is recognizing the MT-HV automatically and is starting the pairing process.
2. Remove the USB-C cable.
Now the MT-HV is connected with the mega macs X.
46
NOTICE
Continuous operation:
• The MT-HV is connected via Bluetooth® with the mega macs X.
• There is a Wi-Fi connection between the displaying device (tablet etc.) and the mega macs X.
MT-HV