Canon CanoScan LiDE 700F Guide De Démarrage Rapide page 15

Scanning Film
10
Place the film in the Film Guide.
Place the film face up in the Film Guide (images and
words should read correctly from above) with the
spaces between frames aligned with the guidelines on
the guide.
11
Remove the cap from the Film Adapter Unit
and gently set the unit over the frame you
wish to scan.
Align the tab on the Film Adapter Unit with the Film
Guide.
Do not move the Film Adapter Unit once it
has been placed on the Film Guide. Sliding it
may scratch the film.
12
Gently close the document cover.
The document cover does not touch the document glass. Be careful not to force the
document cover down.
13
Click OK on the scanning message window.
The scanned image is displayed in the preview area.
Do not move the scanner while it is
operating.
14
Confirm the scanning image, and then click
Scan to start scanning.
Do not move the scanner while it is
operating.
15
When prompted that the scanning completed, click Exit.
14
Guidelines