Cleaning And Care - Brizo T75 Serie Instructions D'installation

75 Series Installation
Valve Trim Installation
4
A.
2
1
3
4
Temperature Control Handle Installation
Install temperature control handle (1) onto
cartridge stem (2) and secure using screw (3).
Snap on decorative cap (4).
5
Potential scald or thermal shock injury could result due to cross flow if outlet at
the shower is blocked or restricted (e.g., pause control on showerhead). Be sure
to point showerhead away from you when re-starting flow or install inlet check
valves on both supply lines to prevent possible injury.

Cleaning and Care

Care should be given to the cleaning
of this product. Although its finish is
extremely durable, it can be damaged by
82666 Rev. G
B.
1
3
4
Diverter Handle Installation
Insert diverter handle (1) onto trim sleeve stem (2).
Using a allen wrench, insert set screw (3) into
handle (1). Applying pressure, insert set screw
cover (4) until properly seated.
harsh abrasives or polish. To clean, simply
wipe gently with a damp cloth and blot dry
with a soft towel.
6
2