Spare Parts; Declaration Of Conformity - Grabo PRO-LIFTER 20 Manuel D'utilisateur

The device is now calibrated and the values in the digital display window should be correct.
NOTICE: The GRABO® Pro-Lifter 20 will display incorrect values on the digital display if
the device is not calibrated on a non-porous surface such as tile or glass. In this case the
calibration process must be repeated on a non-porous material. DO NOT perform this process
on glass that is thinner than 6 mm. Glass thinner than 6 mm may be damaged.
DISPOSAL
Do not dispose of electric equipment, batteries, accessories, and packaging in domestic waste
in observance of the European Directive 2012/19/EC on waste of electrical and electronic
equipment and its implementation in accordance with national law. Electrical equipment that
has reached the end of its life shall be collected separately and returned to an environmentally
compatible recycling facility. The WEEE symbol
disposal occurs.

SPARE PARTS

Name
GRABO® Pro-Lifter 20
Battery
Multi-socket battery charger
Rubber foam seal
Fabric bag

DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product, the GRABO® Pro-Lifter 20,
Model No. NG-Pro-14.8-2Li and GP-1Li-FB-1S, is in conformity with the following standards
or standardized documents: EN 55014-1:2017, EN 55014-2:2015, in accordance with the
provisions of the directives 2014/30/EC, 2006/42/EC, 2011/65/EU.
Technical file at: Nemo Power Tools
Name: Nimo Rotem
Date: 10/11/2021
Signature
GRABO PRO-LIFTER 20 | Operator's manual
will remind you of this when the need for
➍
Article number
GP
TB05000
SP94112
RK13001
SN23017
23