Grabo PRO-LIFTER 20 Manuel D'utilisateur page 20

!
Charge only with the charger specified by the manufacturer.
EN
! During the process of charging, the charger can become warm: this is normal.
NL
! Only use the charger in a dry environment. The charger is not waterproof.
DE
! Ensure that the power supply voltage corresponds to the data on the nameplate of the
FR
battery charger.
!
Keep away from flammable objects while charging.
ES
IT
EXPLANATION OF VISUAL INDICATORS
SE
GRABO® Pro-Lifter 20
DK
Signal
AR
No light
RU
Run status indicator is continuously red
TR
Run status indicator flashes red
Run status indicator is continuously green
Bar indicator on display shows 5 green bars
Last bar of bar indicator on display flashes red Battery capacity is low/empty
Bar indicator on display
Battery Charger
Signal
LED is continuously red
LED is continuously green
MAINTENANCE
WARNING: Changes to the tool and technical modifications are not permitted. This can
lead to injury. If the tool fails despite the care taken in manufacturing and testing procedures,
repair shall be carried out by an after-sales service centre for the GRABO® Pro-Lifter 20.
20
Meaning
The GRABO® Pro-Lifter 20 is turned off
1. The GRABO® Pro-Lifter 20 is turned on
and ready for use
2. Pressure is building up and reaching its
maximum capacity
3. Pump is switched off
Pump is switched on; pressure is low and
building up
Pump is switched on but the motor is off;
pressure has reached its maximum capacity
Battery is sufficiently charged
1 Bar = 20% full
2 Bar = 40% full
3 Bar = 60% full
4 Bar = 80% full
5 Bar = 100% full
Meaning
Battery is charging
Battery is fully charged