Grabo PRO-LIFTER 20 Manuel D'utilisateur page 12

Estimated maximum lifting forces as tested on different materials
EN
NL
DE
Glass
FR
Ceramic tile
ES
Metal
IT
Plastic
SE
Wood
DK
Rough concrete 80 kg/176 lbs
AR
Dry cast pavers
RU
Drywall
TR
NOTICE: When the vacuum level drops below -0.65 Bar (-65 kPa), the GRABO® Pro-Lifter 20
will automatically restart the pump (when the pump is switched on), thereby achieving the
pressure required for use.
General specifications
Running cycles (on full charge)
Rated air flow
Applicable surface type
SCOPE OF DELIVERY
NOTICE: The exact scope of delivery may change, but it will always contain the items listed
below. If your delivery contains any additional items, these will be listed separately. See Spare
Parts for more information on ordering spare parts.
BASIC GRABO® Pro-Lifter 20 SCOPE OF DELIVERY:
• GRABO® Pro-Lifter 20 (tool only)
• Battery
• Operator's manual
12
Perpendicular holding force
170 kg/375 lbs
170 kg/375 lbs
110 kg/242 lbs
100 kg/220 lbs
100 kg/220 lbs
80 kg/176 lbs
75 kg/165 lbs
Parallel holding force
⓫
120 kg/265 lbs
120 kg/265 lbs
110 kg/242 lbs
100 kg/220 lbs
65 kg/143 lbs
80 kg/176 lbs
80 kg/176 lbs
65 kg/143 lbs
900 ON-OFF cycles of 10 seconds
20 l/min (0.7 cfm)
Peak/valley heights less than 3 mm/0.1 inch,
arc less than 5°
• Multi-socket battery charger
• Fabric bag OR Blow mold case
⓬