Basic Function Operation; Tare, Zero; Unit; Piececounting - Baxtran OPTIMA Manuel D'utilisation

3. BASIC FUNCTION OPERATION

1. Used to deduct the weight of the container on the scale plate (-Max)
2. Move the editable digit to the right when setting the value
1. Set the weight to Zero (±2% CAP)
2. Move the editable digit to the left when setting the value
Quantity sampling/turn off counting function when used for counting function (10/20/50/100)
1. Ordinary weighing switching unit. (kg
2. Menu selection. return to the previous menu or normal weighing mode When setting the value.
Esc
1. To activate/desactivate working mode.
2. Increase the selected digit
1. Ordinary weighing and PRINT functions
2. Confirm function when setting menu.

3.1 TARE, ZERO

3.1.1 PRESS THE TARE BUTTON TO DEDUCT THE GROSS WEIGHT
The Tare button is used to deduct the weight of any container placed on the scale.
The weight shown on the display after pressing
When removing the container, display negative values, and then press the
3.1.2 ZERO
Press button before weighing to ensure that the scale starts from zero.

3.2 UNIT

Press to choose the unit of weight: kg and g will be displayed in a cycle every time you press it.

3.3 PIECECOUNTING

Long press to enter count mode. By pressing
average weight of 10, 20, 50, 100 the number of items, the more samples, the more accurate). Press
display. Place the selected number of samples on the plate and press
of the single item has been calculated and set. Now, the display will show the number of units on the platform. By adding more or removing
some of the items, will be reflected in the display through appropriate numbers.
To come back to normal mode, press
12
g)
is net weight.
, select the sample size that you want to measure for setting the reference value (the
and the scale will return to normal mode.
OPTIMA USERS GUIDE
key to return to zero.
. Now, Load-C will appear on the
to confirm. A double beep sound confirms the reference value
EN EN