Hubbell CFB10G55 Instructions D'installation page 4

Flat Flange Installation – FLUSH (shown): Open Cover and turn four Jack Screws to adjust Flat Flange with Cover.
Minimum ceramic tile thickness 3/16" [4.8mm].
Figure A
Pour Depth
See Table
and refer
to Fig. 3.
Ceramic Tile or Laminate Flooring
Floor Box Pour Depth Flat Flange With Cover
CFB10G55, xxCR 5-1/2" 610GTCCVRxx
Flat Flange Installation – SURFACE (shown): Open Cover and turn four Jack Screws to adjust Flat Flange with Cover flush
to surface of tile floor. Minimum VCT thickness 1/8" [3,2 mm].
Figure B
Pour Depth
See Table
and refer
to Fig. 3.
VCT, Ceramic Tile or Laminate Flooring
Floor Box Pour Depth Flat Flange With Cover
CFB10G55, xxCR 5-1/2" 610GTCCVRxx
FLUSH Flange Installation – FLUSH (shown): Open Cover and turn four Jack Screws to adjust Tile Flange with Cover flush to surface of tile
floor. Minimum tile thickness 3/16"[4.8mm].
Figure C
Pour Depth
See Table
and refer
to Fig. 3.
Ceramic Tile
Floor Box Pour Depth Flush Flange With Cover
CFB10G55, xxCR 5-1/2" 610GTCVRxx
PD2527
(Page 4) 08/16
Apply Gasket or
To attach
Grout or Silicone
Ceramic Tile
Flat Flange,
Compound to
See Fig. 5.
Joint.
Concrete
Apply Silicone
To attach
Compound to
Flat Flange,
Joint.
See Fig. 5.
Tile
Concrete
Apply Grout or
To attach
Silicone
Flush Flange,
Compound to
Tile
See Fig. 5.
Joint.
FLUSH Flange Installation – FLUSH (shown): Open Cover and turn four Jack Screws to adjust Tile Flange with Cover flush
to surface of floor.
Cover Shown
Closed
Figure D
Jack
Screws
VCT or Finished Concrete Flooring
Floor Box Pour Depth
CFB10G55, xxCR 6.0"
Carpet Installation – Cut opening in carpet as shown for both FLUSH and FLAT flange styles.
Cover Shown
Closed
Figure E
Jack
Screws
Flat Flange Carpet Installation – SURFACE (shown): Open Cover and turn Jack Screws [4] to adjust Flat Flange with Cover
flush to surface of carpet.
Cover Shown
Closed
Jack
Screws
Carpet Flooring
Floor Box Pour Depth
Floor Box
CFB10G55, xxCR 5-1/2"
PD2527
(Page 5) 08/16
Apply Grout or
VCT
Finished
Silicone
Concrete
Compound to
Floor
Joint.
Pour Depth
See Table
and refer
to Fig. 4.
Flush Flange With Cover
610GTCVRxx
10-3/8"
[26,4 cm]
To attach
Flat Flange,
See Fig. 5.
Carpet
Concrete
Pour Depth
See Table
and refer
to Fig. 3.
Flat Flange With Cover
610GCCVRxxC
To attach Cover Shown
Flush Flange, Closed
See Fig. 5.
Raised
Flange
Jack
Screws
8-7/8"
[22,5 cm]
Gasket Flange
(compressed)
Cover
Shown
Closed
Jack
Screws