Internal Components; Removing The Cover - Asus Pundit P1-PH1 Barebone System Guide D'installation Rapide

Internal components

3 3 3 3 3
4 4 4 4 4
1. 5.25-inch optical drive and
3.5 inch hard disk drive cage
2. Front panel cover
3. Power supply unit
4. PCI card riser bracket
(connected to the
motherboard PCI slot)

Removing the cover

1. Remove the cover screws. Keep the screws for later use.
2. Pull the cover slightly toward the rear panel.
3. Lift the cover, then set aside.
1 1 1 1 1
1 1 1 1 1
5 5 5 5 5
6 6 6 6 6
5. ASUS motherboard
6. DIMM sockets
7. LGA775 socket (under the CPU
fan and heatsink assembly)
8. CPU fan and heatsink assembly
2 2 2 2 2
Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e
2 2 2 2 2
8 8 8 8 8
7 7 7 7 7
3 3 3 3 3
3 3 3 3 3