Asus Pundit P1-PH1 Barebone System Guide D'installation Rapide page 4

Removing the front panel cover
1. Lift the front panel cover
hooks outward.
2. Carefully remove the front
panel cover, then set it aside.
Removing the storage drive assembly
1. Lay the system on its side,
then locate and remove three
storage drive assembly screws.
Removing the CPU fan and heatsink
1. Disconnect the CPU fan cable.
2. Loosen the CPU fan and
heatsink assembly screws.
4 4 4 4 4
1 1 1 1 1
2. Lift the storage drive
assembly, then set aside.
3. Lift the CPU fan and heatsink
assembly, then set aside.
Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e Q u i c k i n s t a l l a t i o n g u i d e
2 2 2 2 2