Operating The Blower - Echo CPLB-58V Manuel D'utilisation

OPERATION
WARNING
Be sure the battery pack is fully seated and secure in the
blower battery port before beginning operation. Failure
to securely seat the battery pack could cause the battery
pack to fall out, resulting in serious personal injury.
To remove:
 Move the cruise control lever completely forward (off
position).
 Press the battery latch button on the tool and pull the
battery pack out using the handle.
WARNING
To avoid serious personal injury, always remove the
battery pack and keep hands clear of the trigger when
carrying or transporting the tool.
Starting/Stopping the Blower
See Figure 4.
 To start the blower, depress the switch trigger.
 To stop the blower, release the switch trigger.

Operating the Blower

See Figure 5.
 To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
 To reduce sound levels, limit the number of pieces of
equipment used at any one time.
 Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when water
is available.
8
 Conserve water by using power blowers instead of hoses
for many lawn and garden applications, including areas
such as gutters, screens, patios, grills, porches, and
gardens.
 Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
 After using blowers or other equipment, CLEAN UP!
Dispose of debris properly.
Cruise Control and Turbo Boost
See Figure 4.
 Squeeze the switch trigger.
 Move the cruise control lever toward the rear of the blower
and into either the LOW (1), MEDIUM (2), or HIGH (3)
speed position.
 Release the switch trigger and your blower will continue
running at the speed you selected.
 Press the turbo boost to increase the air flow to the
maximum velocity.
NOTE: The turbo boost button will override the cruise
control feature. The blower will return to the previously
selected speed when the button is released.
 To stop the blower, move the cruise control lever completely
forward (off position).
If the cruise control feature is engaged during use and the
battery pack is removed from the tool, disengage the cruise
control feature immediately.
WARNING
Before connecting a battery pack to the blower, always
check to be sure it is not in cruise control (move the
cruise control lever completely forward to the off
position). Failure to ensure that it is not locked-on could
result in accidental starting of the blower resulting in
possible serious injury. Do not lock the switch trigger in
applications where the blower may need to be suddenly
stopped.
English