BLAZE BLZ-PBLTE Guide D'utilisation Et D'entretien page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

A safety relief device having direct communication with the vapor space of the cylinder.
A method of mounting.
The gas supply must be turned off at the LP Gas supply cylinder and the LP Gas supply cylinder must be
disconnected from the regulator when this outdoor cooking gas appliance is not in use.
Always sit the cylinder in an upright position so that the cylinder valve is at the top. This will ensure proper
vapor withdrawal.
The cylinder should not be stored in a building, garage, or any other enclosed area. It should be stored
outdoors in a protected, cool, and dry location out of reach of children.
Never store any spare or extra gas cylinder(s) around or in the outdoor kitchen containing the BLAZE
appliance or any other open flame, heat-producing appliance(s) or heat source.
Filling and Refilling LP Gas Cylinders:
Turn control knobs and cylinder valve to the OFF position. Unscrew valve.
Remove cylinder and have it filled at your local qualified propane dealer.
Once filled, carefully connect the valve and make sure it is secure and not leaking.
With the control knobs in the OFF position, turn on the cylinder valve.
If you smell gas or hear a hiss of gas escaping from the tank, get away from the tank and do not attempt to
correct the problem yourself. Call the Fire Department immediately.
If your appliance has no leak at the cylinder, then re-check for loose connections and retest for leaks using the
method detailed in the following pages with soapy solution.
Do not subject your LP gas cylinder to excessive heat, and always store the cylinder in an upright position.
Never store your LP cylinders indoors.
Make sure that when attaching components, all connections are secured and fully tightened to prevent leakage.
BLAZE Instructional Book
Page | 21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Blz-propb

Table des Matières