Dc Voltage Measurement - KPS MT30 Manuel D'instructions

Digital multimeter
6.4 AC Voltage
Range Resolution
200V
600V
Overload Protection: 600V dc or rms. ac for all ranges.
Frequency range: 40Hz to 400Hz.
Response: Average responding, calibrated in rms. of a sine wave.)
6.5 Resistance
Range Resolution
200Ω
2kΩ
20kΩ
200kΩ
2MΩ
Maximum Open Circuit Voltage: 3.2V
Overload Protection: 250V dc or rms. ac for all ranges.
6.6 Diode and continuity
Range
If continuity exists (about less than 1.5k ), built-in buzzer will sound
Overload Protection: 250V dc or rms. ac. RESISTANCE.
7. OPERATING INSTRUCTIONS

7.1 DC Voltage measurement

(1) Connect the red test lead to the "V.Ω.mA" jack and the black lead to the "COM"
jack.
(2) Set rotary switch at desired DCV position. If the voltage to be measured is not
100mV
1V
0,1Ω
1Ω
10Ω
100Ω
1kΩ
Show the approx. forward voltage drop of the diode.
Accuracy
±1,2% of reading, ± 10 digits
Accuracy
±0,8% of reading, ± 5 digits
±0,8% of reading, ± 2 digits
±1,0% of reading, ± 5 digits
Description
13