Putting The Pool Cleaner Into The Pool; Removing The Pool Cleaner From The Pool - Maytronics Dolphin WAVE 50 Instructions D'opération

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

5.2. Putting the Pool Cleaner into the pool

If the foam climbing rings on the brushes are dry soak them in water until soft.
Shake the robot from side to side or turn
it upside down to release trapped air.
Let it sink to the pool floor.
ON
Turn the power supply ON.

5.3. Removing the Pool Cleaner from the pool

The robot will perform automatic shut-off at the end of the cleaning cycle.
OFF
Turn OFF and unplug the power supply.
CAUTION
Dolphin WAVE 50 Pool Cleaner | Operating Instructions
5

Publicité

Table des Matières
loading

Table des Matières