Thinkware U1000 Guide De Démarrage Rapide page 13

Using the continuous recording features
Connect the power cable to the product's DC-IN power port and then turn
on the vehicle's electrical accessories or start the engine. The status LED
and the voice guide are turned on, and the continuous recording starts.
Mode
Continuous During driving, videos are recorded in 1 minute
recording segments and stored in the "cont_rec" folder.
When an impact to the vehicle is detected, a video is
Incident
recorded for 20 seconds, from 10 seconds before the
continuous
detection to 10 seconds after the detection, and stored
recording
in the "evt_rec" folder.
Recording manually
You can record a scene you want to capture while driving and store it as a
separate file.
To start manual recording, press the manual recording (REC) button. Then,
manual recording will start with the voice guide. During manual recording,
the product operates as follows.
Mode
When you press the manual recording (REC) button, a
Manual video will be recorded for 1 minute, from 10 seconds
recording before to 50 seconds after pressing the button, and
stored in the "manual_rec" folder.
Operation description
Operation description
Recording
LED (REC)
On
Flickers
Recording
LED (REC)
Flickers
11