Connecting Diagram Flow Control - Abicor Binzel CR1000 Mode D'emploi

CR1000/CR1250
Pos.
16
17
18
19
20
Tab. 11

13.3 Connecting diagram flow control

NOTICE
• This connection option is only suitable for 2-cycle mode.
• The cooling unit disconnects the welding current if the coolant level is low and the torch trigger is
• The flow control is preset to 0.6 – 0.8 l/min.
Welding power source
Torch control switch
at welding power source
Connecting diagram flow control
Fig. 12
Item description
Support for coolant container
Coolant container bracket (x 2)
Coolant container
Outlet neck screw cap
Filler neck screw cap
CR1250 spare parts
pressed.
Torch trigger
Connection housing
Flow control connector
at front of cooling unit
Flow control
(low cooling liquid volume opens
switch)
13 Appendix
EN - 23