Display Light; Clean Lock; Self-Test; Setting The Brightness Of The Control Panel - Thermador T18IW900SP Guide D'utilisation Et D'entretien

Display light

You can use the preprogrammed light modes to
illuminate your wine bottles when the door is closed.
The individual climatic zones have different
illumination levels.
Using the display light
Press the button to open the Display light
1.
n
menu.
Select a light mode or press the
2.
switch the display light off.
Press 8 button.
3.
The setting is saved.

Clean lock

You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 15
Press : button to open the Settings menu.
1.
Press < button.
2.
The cleaning display appears, and the countdown
starts.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press : button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press > button to move to the menu item
4.
Automatic clean lock.
To change the setting, press : button.
5.

Self-test

This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 17

Setting the brightness of the control panel

1.
2.
3.
4.
5.
6.
button to
o
7.

Switching standby display on and off

If you switch on the standby screen, you can select
what is displayed on the control panel when the door
is closed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Switching key press sound on or off

You can switch the sounds generated when pressing
keys off and back on again.
1.
2.
3.
4.
5.
6.
7.
8.
Operating the appliance en-us
Press : button to open the Settings menu.
Press < button to move to the menu item
Appliance settings.
Press 8 button.
Press : button to open the menu item
Brightness.
Use < > buttons to set the required brightness.
Press 8 button.
The setting is saved.
Press ; button to exit the menu.
Press the : button to open the main menu.
Use the < button to move to the menu item Basic
settings.
Press 8 button.
Use the > button to scroll to the Standby
screenmenu item.
Press : button.
Use buttons < > to select whether the Standby
screen is switched on or off.
Press 8 button.
When the Standby screen has been switched on,
you can use the buttons < > to select whether the
logo or the temperature is displayed with the
functions switched on.
Press 8 button.
The setting is saved.
Press ; button to exit the menu.
Press : button to open the Settings menu.
Press < button to move to the menu item
Appliance settings.
Press 8 button to open the menu item.
Press > button to move to the menu item Key
press sound.
Press : button to open the menu item.
Use < > buttons to select the required setting.
Press 8 button.
The setting is saved.
Press ; button to exit the menu.
11