Pro-User APB120 Mode D'emploi page 7

4. Tighten the magic tape to fix the position.
Remark: Please make sure the male and female of the magic tape are matched perfectly
before you connect the metal buckle of the magic tape to the main unit, once you
connect them, you can not pull the metal buckle out.
5. Choose a Location and Install Power Cable as below alternative methods showed in
the pics:
a. Choose a location on windshield or dashboard of your car, where does not obstruct
your vision.
b. Insert the small 12 Volt DC plug of the power cable into the top of the mirror.
c. Connect the Cigarette DC plug cable (provided) with the cigarette lighter socket/12V
power outlet of vehicle.
Remark: The cable must not interfere the safe operation of the vehicle.
6