Signals - Simons Voss Technologies SmartCD.G2 Guide Abrégé

SmartCD.G2

7 Signals





The second LED (yellow/BATTERY) only lights up when the
SmartCD.G2 is connected to the computer via the USB to charge, for
example, and at least one of the batteries needs charging.


The third LED (green/WIRELESS) lights up when there is wireless
communication between SmartCD.G2 and a locking device for
programming, reading and similar.
EN
LED 1 | green | POWER - ON: Device operational.
LED 1 | green | POWER - FLASHES: Stand-by mode.
The first LED (green/POWER) lights up when the SmartCD.G2 is
connected to the PC or laptop using USB or when the SmartCD.G2
is switched on by pressing the button without a USB connection.
The device can be switched off again to save power by re-pressing
the button.
LED 2 | yellow | BATTERY - ON: Batteries are being charged.
LED 2 | yellow | BATTERY - OFF: Batteries are fully charged.
LED 3 | green | WIRELESS - FLASHES QUICKLY: Communication
with a SimonsVoss locking device
LED 3 | green | WIRELESS - FLASHES SLOWLY: No connection.
7. Signals
27 / 104