Scope Of Supply; Connection To A Pc/Laptop - Simons Voss Technologies SmartCD.G2 Guide Abrégé

SmartCD.G2

3 Scope of supply



You need the SimonsVoss software LDB or LSM to use the
SmartCD.G2.
You also need the LSMmobile software on your mobile device to
programme components in situ.
This software is not included in the scope of supply, so it must be
ordered separately.
Please read the PDA manufacturer's manual before initial operation.
Software and drivers can be found on the SimonsVoss homepage in the
service area during software downloads (
voss.com/en/service/software-downloads.html

4 Connection to a PC/laptop

SmartCD.G2 can be directly connected to a PC or laptop by plugging
the supplied cable into an unassigned USB port.
All digital locking devices and all active transponders/transponder
media in SimonsVoss System 3060 can be programmed using a
SmartCD.G2 in conjunction with a PC, netbook or laptop.
EN
SmartCD.G2 programming device, including permanently built-in
batteries
Cable to connect to a USB port
3. Scope of supply
https://www.simons-
).
23 / 104