Pfannenberg Quadro LED-RGB-3G Mode D'emploi page 8

en
Content
1. Intended use ................................................................................................................................................... 1
2. Scope of delivery ........................................................................................................................................... 1
3. Dimensions ..................................................................................................................................................... 2
4. Technical data ................................................................................................................................................ 2
4.1 General ....................................................................................................................................................... 2
4.2 Electrical data.............................................................................................................................................. 3
5. Conformity to standards/ designations ....................................................................................................... 3
6. Commissioning .............................................................................................................................................. 4
6.1 Safety information ....................................................................................................................................... 4
6.2 Assembly and installation ........................................................................................................................... 5
6.3 Electrical connection ................................................................................................................................... 6
6.4 Setting the operating modes ....................................................................................................................... 6
6.5 External control of the operating modes ..................................................................................................... 7
7. Option ............................................................................................................................................................. 8
8. Maintenance, service, repairs ....................................................................................................................... 8
9. Decommissioning, dismantling and disposal ............................................................................................. 8
1. Intended use
Quadro LED-RGB-3G/3D multi-functional lights are designed for the optical signaling of e.g. hazardous situa-
tions or for status displays of machines and systems. The light signals are generated by LEDs that have a long
life expectancy and a robust mechanical design.
The lights are suitable for use in potentially hazardous area of Zone 2, in accordance with EN 60079-10-1 and
in Zone 22, in accordance with EN 60079-10-2. The LEDs can be used for gases of temperature classes T1,
T2, T3, T4, T5 and T6.
The lights can also be used in environments with non-conductive dusts. The surface temperature of the hous-
ing will not exceed 80°C.
The LED in the light section can be operated in different modes, all of which can be activated by an internal
switch. Different colors can be assigned to the individual operating modes.
The option of selecting alternative operating modes and colors via external control is featured additionally.
The devices must only be operated when undamaged and within the specified parameters.
The devices are designed for indoor and outdoor use and are only intended for fixed installation.
2. Scope of delivery
The scope of delivery consists of:
1x Signaling device
1x Quick guide
1x CE declaration
1x Set of fixing brackets
03/2021
Quadro LED-HI-3G/3D Operating Instructions
Page 1 / 8 086200012a