Know Your Product; Symbols On The Product; Safety Devices - Ryobi RY100PWA Mode D'emploi

■
Regularly inspect and maintain the high
pressure cleaner for safe operation. RYOBI
recommends inspecting the product every
6 months.
■
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure that
the product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorised
service centre.

KNOW YOUR PRODUCT

See page 145.
1. Carry handle
2. Power cord holder
3. On/off switch
4. Operator's manual
5. Handle screws
6. Water inlet filter
7. Water inlet port
8. Power cord
9. Hose release button
10. Water outlet port
11. Trigger gun holder
12. Extension lance
13. Trigger handle lock
14. Trigger
15. Hose lock button
16. High pressure hose
17. Vario lance
18. Garden hose
19. RYOBI detergent
20. Garden hose connector
21. Turbo lance
22. Detergent bottle
NOTE: If using a detergent, refer to the Material
Safety Data Sheet of the detergent.

SAFETY DEVICES

■
On/Off switch
– The on/off switch prevents unintentional
operation of the product.
■
Trigger handle lock
– The trigger handle lock locks the trigger
and prevents unintentional opening of
the high-pressure jet.
6
Original Instructions
■
Overflow valve with pressure switch
– The overflow
permissible working pressure from being
exceeded. If the lever on the trigger gun
is released, the pressure switch turns
off the pump and the high-pressure jet
stops. If the lever is pulled, the pump
turns on again.
■
Overload protection
– A thermal sensor protects the product
from overloading. The product will
automatically shut the power down while
overheating.

SYMBOLS ON THE PRODUCT

Read and understand
all instructions before
operating the product. Follow
all warnings and safety
instructions.
Class II tool, double insulation
Wear eye and hearing
protection.
Power
The product is not suitable
for connection to the drinking
water mains without backfl ow
preventer.
Never point the spray wand to
people, animals, the body of
the product, power supply, or
any electric appliances.
Rated pressure
Turn the bottom portion of the
nozzle all the way to the right
to activate low pressure mode
for foaming/detergent.
European Conformity Mark
valve prevents the