Product Specifications; Features - Ryobi RY803000E Manuel D'utilisation

PRODUCT SPECIFICATIONS

Engine..............................................................................................................................................................Honda GCV160
Fuel Tank Capacity ..................................................................................................................................................... 0.25 gal.
Maximum Pounds Per Square Inch Pressure* .......................................................................................................... 3,000 psi
Maximum Gallons Per Minute* ....................................................................................................................................2.3 gpm
Maximum Inlet Water Temperature ................................................................................................................................. 104˚F
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUTOMATIC SOAP INJECTION SYSTEM
Pour pressure washer detergent into the soap tank to apply
detergent quickly and easily to your cleaning project. Use
of the soap nozzle will activate the soap injector at a 20:1
dilution ratio.
FUEL TANK
This fuel tank has a maximum capacity of 0.25 gal. Use
unleaded automotive gasoline in the engine.
HONDA GCV160 ENGINE
This Honda engine enables the pressure washer to achieve
3,000 psi (pounds per square inch) at a rate of 2.3 gpm
gallons per minute). Please read the engine manual included
with this product.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.

FEATURES

ON/OFF SWITCH
The on/off switch is used in combination with either the
engine start switch or the starter grip and rope to start the
pressure washer.
SOAP NOZZLE
The blue or black soap nozzle is used to apply detergent at
low pressure only.
STARTER GRIP AND ROPE
The starter grip and rope is pulled to start the machine.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from reach-
ing harmful levels by releasing a small amount of water. Once
the water has drained, the thermal relief valve will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
Page 6 — English