Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BEFORE INSTALLATION
•
Before installation read the operation manual thoroughly.
This way you can use all the benefits of the device and
prevent damage.
•
Only an electrician or a person with equal qualifications may
install the device.
•
Installation and maintenance of the device are only allowed when
it is not under voltage.
•
For unique problems that are not covered in the installation
manual, contact your vendor to ensure safety.
•
It is not permitted to alter or rebuild the control device without
authorization.
•
The manufacturer has the right to make improvements to the
device. The latest version of the operation manual can be found
on the webpage (www.huumsauna.com)
•
Make sure that the building's cables from the main switchboard to
the sauna's desired location have sufficient cross-section. In case
of an older building, pay attention to the condition of the connecting
boxes and if possible, install a new cable from the switchboard to
the sauna. Install separate protection for the heater.
•
It is recommended to connect the unit to the mains without an
earth-leakage circuit breaker.
Symbols used in the installation manual:
WARNING!
Not following these instructions may lead to serious or fatal
injuries.
CAUTION!
Not following these instructions may lead to minor to
semi-serious injuries or cause damage to objects.
NB!
Also, follow the special safety requirements given in the individual
chapters. Dispose of the packaging material according to the applicable
disposal rules and regulations.
In the guide, the following details of the sauna are marked with numbers:
•
UKU control panel
1
•
Main module
2
•
Door sensor
3
•
Temperature sensor
4
•
Heater (not included)
5
•
Vaporizer (not included)
6
•
Light (not included)
7
4
Publicité
Table des Matières
