T-Fal POWERGLIDE Anti-Calc Mode D'emploi page 19

IS THERE A PROBLEM WITH YOUR IRON?
PROBLEMS
Your iron
produces little to
no steam.
The soleplate
is scratched or
damaged.
The iron steams
once the water
tank has been
filled.
The spray does
not spray water.
If you have any problems or queries please call our Customer
Relations team first for expert help and advice:
consult our website for contact details: www.t-falusa.com
POSSIBLE CAUSES
The water tank is empty.
The anti-limescale collector
is dirty.
Your iron is clogged up with
limescale.
Your iron has been used for
too long in the dry ironing
function.
You have placed your iron on
a metallic iron rest or ironed
over metal zips or fastners.
The steam control dial is not
set to .
The water tank is too full.
The water tank is not full
enough.
SOLUTIONS
Fill it up.
Clean the anti-limescale collector.
Clean the anti-limescale collector
and steam chamber.
Clean the steam chamber.
Always place your iron on its heel
rest when not in use.
Do not iron over metal zips or
fastners.
Ensure that the steam control dial
is set to
Do not exceed the max level for
filling.
Add water to the water tank.
19
.