Installing The Surround Speakers On A Wall (Sold Separately) - Samsung Harman/Kardon HW-Q90R Mode D'emploi

7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
8. Slide the Soundbar down as shown below so
that the Bracket-Wall Mounts rest securely
on the Holder-Screws.
• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Mounts, and then slide the Bracket-Wall
Mounts down so that the Bracket-Wall
Mounts rest securely on the
Holder-Screws.
Installing the Surround
Speakers on a Wall (Sold
Separately)
You can purchase wall mounts separately to
install the surround speakers on a wall.
Notes for Wall Mounting the Surround
Speakers
• Surround Speaker wall mounts must be able
to support more than 2.0 kg.
• Hole size : 1/4 - 20 UNC threaded insert
• Since wall-mount installation is optional, you
must purchase the corresponding accessories
separately.
• Please have a qualified installer install the
surround speaker Wall Mount Brackets.
• Ask a professional installation company to
mount your product on the wall.
• Check the strength of the wall before you
install the Wall Mount Brackets. If the
strength is insufficient, make sure to reinforce
the wall before installing the Wall Mount
Brackets and the speakers on the wall.
• For more information, please refer to the Wall
Mount's manual.
• Samsung Electronics is not liable for any
damage to the product due to the product
being installed inappropriately.
• Take care not to install the speakers sideways
or upside down.
ENG - 33