Honeywell VP527A Instructions D'installation

Les langues disponibles

Télécharger ce manuel

BEFORE INSTALLATION

Allow sufficient room for servicing or removing the valve. See

Fig. 1 for space requirements. This valve can be installed in

any position. The direction of the flow should be in the same

direction as the arrow cast on the valve body.

INSTALLATION

1. Mount the valve. See Fig. 1 and 2.

2. Connect the control air tubing.

NOTE: No calibration or adjustments are necessary.

® U.S. Registered Trademark

VP527A Pneumatic

Water Valve

INSTALLATION INSTRUCTIONS

AIR CONNECTION

FOR 1/4 IN. (6 MM)

2-1/4 (57) DIA.

O.D. PLASTIC TUBING

1-3/8

(35)

3-1/8 (79)

1/2 IN. (12MM) X 45° SAE FLARED TUBE

CONNECTION - 2 (NOT FURNISHED)

ALLOW 1-1/2 IN. (38 MM) MINIMUM CLEARANCE TO SERVICE VALVE,

2-1/2 IN. (63 MM) CLEARANCE TO CONNECT TUBING STRAIGHT TO

CONNECTOR. IF CLEARANCE IS LESS THAN 2-1/2 IN. (63 MM),

USE AN ELBOW CONNECTOR.

ALLOW 1-3/8 IN. (35 MM) MINIMUM CLEARANCE TO REMOVE VALVE.

Fig. 1. VP527A dimensions in in. (mm).

1-1/2

(38)

3-13/16

(97)

1-5/8

(41)

M18348

95-5555EF

Page 1 CONNECTOR. IF CLEARANCE IS LESS THAN 2-1/2 IN. (63 MM), USE AN ELBOW CONNECTOR. ALLOW 1-3/8 IN. (35 MM) MINIMUM CLEARANCE TO REMOVE VALVE. M18348 Fig. 1. VP527A dimensions in in. (mm). ® U.S. Registered Trademark Copyright © 2002 Honeywell • All Rights Reserved 95-5555EF...
Page 2 COPPER TUBING CONNECTORS (2) (NOT FURNISHED) M18349 Fig. 2. VP527A connectors and copper tubing dimensions in. (mm). TYPICAL OPERATION An increase in control air pressure moves the valve stem toward the closed position, modulating flow through the valve. CONTROL AIR VP527A N.O.
Page 3 INFÉRIEUR À 63 MM (2 1/2 PO), UTILISER UN COUDE. LAISSER UN DÉGAGEMENT MINIMAL DE 35 MM (1-3/8 PO) POUR RETIRER LA VANNE. MF18348 Fig. 1. Encombrement de la vanne VP527A en mm (po). ® Marque de commerce déposée aux É.-U. Copyright © 2002 Honeywell Tous droits réservés 95-5555EF...
Page 4 Fig. 3. Fonctionnement type de la VP527A. By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’...