To Start The Product - Husqvarna BMC 335 Manuel D'utilisation

• For standard operation with diamond blades, set the
direction of rotation to counterclockwise.
• If the product is used as a scarifier, set the direction
of rotation to clockwise.

To start the product

1. Start the dust extractor.
2. Put the cord of the operator presence control around
your right wrist.
1816 - 001 - 05.04.2022
All manuals and user guides at all-guides.com
3. Push the drive system pedals to engage the drive
system.
4. Turn the emergency stop button on the control panel
clockwise to make sure that the emergency stop
button is disengaged.
5. Set the main switch on the electrical enclosure in the
ON position.
6. Set the joysticks in neutral position.
7. Push the ON button for the drive motor (A). The light
(B) comes on when the drive motor has power.
A
B
E
8. Push the ON button for the drum motor (C). The light
(D) comes on when the drum motor has power.
Note:
The drum motor cannot start if the drive
system is not on.
9. Wait 10–15 seconds until the color of the display (E)
changes from red to white.
C
D
15