Step 2: Find The Dbm Reading On Your Phone; Need Help - weBoost Connect 4G-X Mode D'emploi

______
Step 2: Find The dBm
Reading On Your Phone
iPhone®
iOS 9 - 10.3.3
iPhone®
iOS 11 - current
Android™
iPhone is a registered trademark of Apple Inc. Android is a trademark of Google Inc.
All Other Phones & Alternate Methods
• https://www.weboost.com/test-mode-instructions/
All Phones:
• Keep track of the network (3G or 4G) phone is connected to.
• Any signal readings you take are valid for that phone's carrier. To get readings
from other carriers, you'll need phones from each carrier.

NEED HELP?

CONNECT 4G-X
Put your iPhone into fi eld test mode. To do this dial
*3001#12345#* then press call.
1 Hold down power button until you see 'Slide to
Power Off '.
2 Then release the power button.
3 Hold the Home button until your main screen appears.
If you want to check 3G/1x but your iPhone is picking up 4G/
LTE signal, go to Settings>Cellular>Cellular Data Options>En-
able LTE>Select Off .
After you system is set up, you can go back to the dots signal
by once again dialing *3001#12345#* then pressing call.
When the menu comes back up, tap "phone" in the top left
corner of your phone.
iOS 11 no longer displays the decibel (dBm) reading in 'Field
Test Mode'. Tip: Using the bar indicator on your cell phone can
assist you in fi nding the strongest signal direction as well as
placing calls in diff erent locations. For changes/updates on
this issue, periodically go to weboost.com/signalstrength.
Settings > About Phone > Status or Network > Signal Strength
or Network Type and Strength (exact options/wording
depends on phone model).
support.weboost.com
CELL PHONE SIGNAL BOOSTER
866.294.1660
3