Test System: Lights; Important - weBoost Connect 4G-X Mode D'emploi

______

Test System: Lights

Band 12/13/17 an d 2/1
Each light corresponds to a frequency band.
IMPORTANT: To get an accurate reading of the lights, unplug and re-plug
!
the power supply from the Booster.
No Lights
Booster does not have power. Un-plug and securely re-plug in power supply.
Fix Any Red Light Problems (red indicates oscillation)
• If you are happy with coverage, red lights don't have to be resolved.
• Solid Red = Band has shut off
• Blinking Green/Red = Band has reduced gain
skinny side
facing Cell Tower
CONNECT 4G-X
Connect 4G-X
B Band 5 a d 5
1 Verify Outside Antenna faces away from the
Inside Antenna. Un-plug and re-plug in power
supply.
2 Verify the Inside Antenna is at least 18" from the
Booster and pointed away from the Booster. Un-
plug and re-plug in power supply.
3 Tighten all cable connections. You may want to
undo and redo the connection completely. Un-
plug and re-plug in power supply.
4 BEST: Increase the distance (horizontally or
vertically) between the Outside and Inside
Antenna. Add cable if needed. Un-plug and re-
plug in power supply.
CELL PHONE SIGNAL BOOSTER
®
B Band 2 a nd d 2 B Band 4 an d d 4
13