Controls; Power On/Off Switch O / I; A Button; Rotary Knob - Bosch Vero Professional TCA71-RW Mode D'emploi

e
sPresso
 à À Á Å Æ
Note: The factory settings of the fully
automatic espresso machine are
programmed for optimal performance. The
appliance switches to "energy saving mode"
automatically after 1 hour (see "Menu
a
uto oFF aFter ").
settings
N.B.: If the appliance is being used for the
or the appliance has not been operated for
have the full aroma and should not be
consumed.
first time, you will achieve a suitably thick
and stable "crema" only after the first few
cups have been dispensed.
Ë Í

Controls

Power on/off switch O / I

The power switch 1 O / I is used to switch
the appliance to "energy saving mode" or to
switch it off completely. In "energy saving
mode" only the
Important: Do not switch the appliance off
at the power on/off switch 1 until it is in
energy saving mode, so that the automatic
rinse process can take place.
a
button
The appliance is switched on (ready for
use) or put into "energy saving mode" with
a
the button 2.
a
The button 2
is rinsing.
The appliance does not rinse if:
it is still warm when switched on
no coffee was dispensed before it was
switched to "energy saving mode".
The appliance is ready for use when the
symbols for drink selection and the start
button 8 light up on the display 5.
N.B.: Even when in "energy saving mode"
the appliance recognizes when the drip tray
25 has been removed.

Rotary knob

Turn the knob 6 to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons
Press the selection buttons
navigate up and down through the menu
levels (navigation line 5c).
a
button 2 lights up.
"energy saving mode"
< >
and
< >
and
de en
4 to
5