Hama 00173881 Mode D'emploi page 4

4.4. Installing the universal holder
• Attach the universal holder using the catch on the holder
(adhesive pad, suction cup holder, ventilation grill clamp). (D)
• Press the button on the side of the universal holder to open the
holding brackets. (E – 1)
• Insert the terminal device of your choice and secure it in place by
lightly pushing the holding brackets together. (E – 2)
• Also adjust the lower carrying arms to the terminal device by
pulling them further apart or pushing them closer together.
(E – 3)
• In order to easily remove the terminal device, press the button on
the side of the universal holder. (E – 1)
Note
Always take your terminal device out of the holder before
attaching or removing the holder (adhesive pad, suction cup
holder, ventilation grill clamp).
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
3