Moulinex ME1088 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Safety instruction booklet LS-123456 is supplied with the appliance.
CAUTION: the safety precautions are part of the appliance. Read them
carefully before using your new appliance for the first time. Keep them
in a place where you can find and refer to them later on.
DESCRIPTION
EN
1. ON/OFF/REVERSE button
2. Motor unit
a Handle*
3. Mincer head release button
4. Pusher
5. Removable plastic tray
6. Meat mincer head
7. Screw
8. Blade
USE
Wash all accessories in warm water and washing up liquid. Rinse and dry
carefully. Do not put these parts into the dishwasher.
The perforated plates and blades must be kept lubricated. Apply a little
cooking oil to them.
Do not run the appliance empty or if the perforated plates have not been
oiled.
WARNING! Handle the drums and cones carefully as the blades are
extremely sharp.
USE : MEAT MINCER HEAD (FIG.1 TO 9)
Prepare all the food you wish to mince, removing any bones, cartilage,
skin or nerves. Thaw frozen food completely before mincing.
Cut the meat into pieces (approximately 2 cm x 2 cm).
Tip:When you have finished mincing, put a few pieces of bread into the
appliance to get all of the mince out.
What should you do in the event of a blockage?
Stop the mincer by pressing position "R" on the ON/OFF button(1) one
time. Then press the same position "R" on the ON/OFF button for a few
seconds in order to clear the blocked food.
Press position "I" on the start/stop button (G). to continue mincing.
12
9. Small-hole
(fine mincing)
10. Medium-hole perforated plate
(medium mincing)
11. Aluminium nut
12. Sausage accessory
13. Shredder drums accessory*
14. Shredder cones accessory*
perforated
plate
* depending on model

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Me106832Me1068Me108832

Table des Matières