Installation; Fitting The Front Moulding - NEFF F 3470 Notice De Montage Et D'installation

Installation

Fitting the front moulding

Illustration 1
Illustration 2
Illustration 3
Illustration 4
Illustration 5
30
All manuals and user guides at all-guides.com
The standard appliance includes front moulding,
adjustable feet and splash guard.
In advance:
• Remove all detachable elements, in particular
pan supports and burners.
• Remove accessories from the ovens.
To install, proceed as follows:
• Detach the main oven door
(see the "Care and cleaning" section)
• Pull out the drawer.
• Press the clips (A, see illustration 1) on the
underside. The drawer stop is released.
• Pull out the drawer completely.
• Tilt the cooker backwards.
• Unscrew both side screws
(D, see illustration 2 ).
• Attach front moulding (B) and align with the holes
in the installation position.
• Pull front moulding (B) down until it hooks into the
two pins (C) on the cooker (see illustration 3).
• Tighten the two side screws
(D, see illustrations 4 and 5) again.