Before You Begin; Tools Needed - Barrette BOL-WEB Instructions D'installation

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store. For assistance or replacement parts call: 1-800-265-2220.

BEFORE YOU BEGIN:

Check your local zoning laws.
• Local zoning laws and Home Owners
Associations may regulate the location, style
and height of your fence and gate or even
require a permit signoff beforehand.
• Check local codes for frost line depth and
regulations.
• Additional products and assembly may be
required to meet wind code requirements.
Notice of acceptance (NOA) can be found at
www.miamidade.gov/building/pc-search_app.asp
Contact your local utilities companies.
• You must have the utility companies clearly
mark your property for electrical, gas or
water lines to avoid puncturing any unseen
underground utilities.
Racking Gate Kit
Components:
QTY. Description
2 A Gate Uprights
2 B 2" Pyramid Post Tops
1 C Gate Stop
1 D Latch
2 E Butter y Hinges
1 F Hardware Bag:
F1 • (2) Rail Grippers
F2 • (4) M6 Acorn Nuts
F3 • (4) M6x45mm Bolt
F4 • (6) #10x1" Screws
F5 • (4) M6 Washers
F6 • (2) U-Channel Blocks
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com.
You may also contact us at 1-877-265-2220 or email CS.outdoorliving@barretteoutdoorliving.com.
2 2
B
E
C

TOOLS NEEDED:

Safety Glasses
Level
Tape Measure
Drill
Drill Bits
Pencil
2" Spacer Blocks (2)
Saw
Clamps
F
A
D