Bosch Indego 350 l Notice Originale page 23

OBJ_BUCH-3008-003.book Page 23 Wednesday, November 29, 2017 12:20 PM
the safety of your product and may
result in increased noise and vibra-
tion.
Turn off the product using the isola-
tor switch:
– before clearing a blockage,
– before checking, cleaning or working
on the machine,
– before storage
– if the machine vibrates abnormally
(stop and check immediately),
– after striking a foreign object. Inspect
the machine for damage and get ad-
vice on necessary repairs from your
Bosch Service Centre.
Maintenance
 Always wear gardening gloves
when handling or working near the
sharp blades.

Before working on the mower, turn
it off using the isolator switch.

Before working on the docking sta-
tion or power supply, remove plug
from mains.
Clean the exterior of the machine thor-
oughly using a soft brush and cloth. Do
not use water, solvents or polishes.
Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its back and clean
the blade area regularly. Use a stiff
brush or scraper to remove compacted
grass clippings. (see figure A)
Blades are reversible. (see figure B)
 Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition. (see figure B)
Bosch Power Tools
 Periodically visually inspect the ma-
chine and replace worn or damaged
parts for safety.
 Ensure that only official Bosch re-
placement parts are used.
 Replace all blades and bolts as a set
as required.
Winter Storage and Transportation

Turn off the machine using the iso-
lator switch.

The Indego will operate between 5 °C
and 45 °C. During the winter season
once the temperature in the garden is
consistently below 5 °C store the ma-
chine and the docking station in a se-
cure, dry place, out of the reach of
children.
Do not place other objects on the mow-
er or docking station.
It is recommended to use the original
packaging when transporting the Inde-
go over long distances.
The mower can also be stored using the
Indego 400 storage bag accessory.

Store the machine only within a tem-
perature range between –20 °C and
50 °C. As an example, do not leave
the machine in the car in summer.
USB
 The machine has a USB interface for
Software Updates only. Use only ap-
proved USB.org sticks (formatted
FAT 32) and approved USB.org OTG
cables.
 Do not use the USB interface for
any additional purposes. Do not
plug any external devices.
English | 23
F 016 L81 767 | (29.11.17)