Chauvin Arnoux P01102157 Notice De Fonctionnement page 10

Thank you for purchasing a No. 4 remote control probe. This accessory is designed
for use with C.A 6131, C.A 6133 and MX 535 installation testers.
To obtain the best service from your unit:
„ read this user's manual carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instruc-
tions whenever this danger symbol appears.
Equipment protected by double insulation.
Chauvin Arnoux has adopted an Eco-Design approach in designing
this appliance. Analysis of the complete lifecycle has enabled us to
control and optimize the effects of the product on the environment. In
particular, this appliance exceeds regulation requirements with respect
to recycling and reuse.
The CE marking indicates conformity with European directives, in par-
ticular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European
Union, the product must undergo selective disposal in compliance with
Directive WEEE 2012/19/EU. This equipment must not be treated as
household waste.
Definition of measurement categories
„ Measurement category IV corresponds to measurements taken at the source of
low-voltage installations.
Example: power feeders, counters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
„ Measurement category II corresponds to measurements taken on circuits directly
connected to low-voltage installations.
Example: power supply to electro-domestic devices and portable tools.
ENGLISH
10