Pairing The Remote Control / Bluetooth; Vidaa Account; Voice Control With Alexa; Editing The Channel List - Loewe bild i.65 dr+ set Manuel De L'utilisateur

Loewe bild i | User Manual (part 2 of 2)

Comfort functions
6. If necessary, repeat the procedure or learn
more buttons according to step 3.
7. Finally, press the (Device) button or wait
longer than ten seconds without pressing
a button.
Pairing the remote
control / Bluetooth
You can pair the remote with your TV via Blue-
tooth. In Bluetooth mode, you don't have to point
the remote directly at the TV like with standard
infrared remotes. For maximum comfort when
controlling the TV, we recommend pairing via
Bluetooth.
To pair the remote with your TV via Bluetooth,
press and hold the menu key for at least
three seconds. Watch the display on the screen
to see if the pairing was successful.
To cancel the pairing, enter the menu and then
select: [Settings] -> [Network] -> [Bluetooth] ->
[Equipment Management]. There, select Smart
TV Remote and then the option [Unpair].
Meaning of the LED colours
Under the screen is a small LED that gives you
basic information about the status of the TV.
LED colour TV status
White Standby mode.
Green Switched on.
Blue TV is on with screen off.
Blue Automatic calibration of the
OLED panel during standby
mode.
Red Recording active.

VIDAA account

A VIDAA account gives you all the best features
of your smart TV and always keeps it up to date.
Creating a new account
If you don't have a VIDAA account, create a new
one to enjoy best features of your smart TV.
Before creating a new account, make sure your
TV is connected to the network.
1. Press the (home) button on the remote
control and select (VIDAA Account)
icon in the top navigation bar on the Home
screen.
2. Select [Create Account] on screen.
3. Enter your first name, last name, email ad-
dress and password. Names are optional.
4. Select [Create Account].
Signing into an account
Before signing into your VIDAA account, make
sure your TV is connected to the network.
1. Press the (home) button on the remote
control and select (VIDAA Account)
icon in the top navigation bar on the Home
screen.
2. Register your device to your VIDAA Ac-
count. After entering your email and pass-
word, select [Sign In].

Voice control with Alexa

This TV has Amazon Alexa built-in, allowing you
to use your voice to control your TV. Interact with
Alexa by pressing and holding
button and speaking into the microphone on
your remote control.
To use the Alexa, TV must be connected to the
network and remote control must be paired
with the TV via Bluetooth. To fully integrate
Alexa with your TV, you must be signed into
your VIDAA account. It is possible to use Alexa
on the TV without a VIDAA account, but with
limited functionality.
Setting up Alexa
1. Press (home) button, then select
(Settings) icon, and select [System] ->
[Voice Service] -> [Amazon Alexa].
2. Select [Set voice assistant to Alexa] and
[Set up now]. If you selected Alexa in the
guide when you first turn on the TV, it will
take you directly to the [Set up now] step.
3. You are now at the "Sign in to Amazon ac-
count" screen. Scan the QR code with your
phone or visit the website on your phone
or computer and enter the on-screen code.
The code will expire after 10 minutes. If you
don't have an Amazon account, create a
new one.
4. Once your Amazon account is connected,
the TV screen will change to the next step.
You can log in to your VIDAA account. If
you have signed in before, this step will
be skipped.
5. Give your TV a name from the list or cus-
tomise it.
6. Select [Authorise] and follow on-screen
steps in Alexa Skill Setup. Now, Alexa is
set up and ready. You can enjoy interacting
with Alexa using your voice by just pressing
and holding the (microphone) button
on your remote control. Ask Alexa after
the tone.
Notes:
• Alexa is not available in some countries.
• You can use Alexa without signing in to your
Amazon account by selecting [Do it later].
• You can also skip VIDAA account sign in
step, by leaving the screen. In this case,
you can still use your voice to search on the
internet or change the volume on your TV.
To use additional Alexa commands, sign
in to your Amazon and VIDAA accounts at
any time in Settings.
• Download and install the remote control
app on your mobile device at
-> [Settings] -> [Support] -> [Mobile App
Download]. Press the microphone icon in
the app to interact with Alexa on your TV.
• You can select the language used by Alexa
at (home) -> [Settings] -> [System] ->
[Voice Service] -> [Amazon Alexa] > [Alexa
Language].
(microphone)

Editing the Channel list

From the main menu, go to [Settings] -> [Chan-
nel] -> [Channel Edit] and select the channel list
or favourites list you want to edit.
Select the channel or multiple channels you
want to move or delete with OK. A check mark
appears next to the selected channels.
To move selected channels to a new position:
Press the left arrow button on the remote con-
trol and use the up/down arrows to move the
selected channel(s) to a new position.
To delete selected channels: Press the right
arrow button on the remote control and confirm
deletion.
To restore deleted channels: Press the red but-
ton on the remote control. Press the OK button
to select the channels you want to restore,
then press the left arrow to return them to the
channel list.
Filter: Press the yellow button on the remote
control to display the filter, where you can select
the type of channel to display in the channel list.
Search: Press the blue button on the remote
to search for a specific channel by entering its
name in the search box.
(home)
29