Maintenance And Care; Carbon Brushes - Flex DH 5 SDS-max Mode D'emploi

Locking the switch:
`^rqflk>=
cçääçïáåÖ=~=éçïÉê=Ñ~áäìêÉI=íÜÉ=ëïáíÅÜÉÇJçå=
ã~ÅÜáåÉ=ïáää=ëí~êí=êìååáåÖ=~Ö~áåK=
fÑ=íÜÉ=éçïÉê=Ñ~áäëI=ëïáíÅÜ=çÑÑ=íÜÉ=ÉäÉÅíêáÅ=éçïÉê=
íççä=áããÉÇá~íÉäó>
 Press and hold down the switch.
 Press locking button to lock the switch.
Switch off the machine:
 Press and release the switch.
Operating instructions
1. Insert chisel.
2. Turn chisel into the required position.
3. Swivel the auxiliary handle into the required
position.
4. Insert mains plug.
5. Grip electric power tool with both hands
and assume working position.
6. Switch on the power tool.
16
7. When chiselling, gently press electric
power tool forwards to prevent it from
jumping.
8. After working, switch off the power tool.
9. Pull out the mains plug.
Other information
– The use of "sharp" insertion tools increases
performance and the service life of the
electric power tool.
– Work preferably in intervals: Work 30 sec.,
cool down 90 sec.
– After work, clean the electric power tool
and store in the carrying case in a dry
location.

Maintenance and care

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Cleaning
Regularly clean the power tool and ventilation
slots. Frequency of cleaning is dependent on the
material and duration of use.
Regularly blow out the housing interior and
motor with dry compressed air.

Carbon brushes

The electric power tool features cut-off carbon
brushes.
When the cut-off carbon brushes reach their
wear limit, the electric power tool switches
off automatically.
klqb>
rëÉ=çåäó=çêáÖáå~ä=é~êíë=ëìééäáÉÇ=Äó=íÜÉ=ã~åìJ
Ñ~ÅíìêÉê=Ñçê=êÉéä~ÅÉãÉåí=éìêéçëÉëK=
fÑ=åçåJçêáÖáå~ä=é~êíë=~êÉ=ìëÉÇI=íÜÉ=Öì~ê~åíÉÉ=
çÄäáÖ~íáçåë=çÑ=íÜÉ=ã~åìÑ~ÅíìêÉê=ïáää=ÄÉ=ÇÉÉãÉÇ=
åìää=~åÇ=îçáÇK
When the power tool is being used, the carbon
brushes can be seen sparking through the rear
air inlet apertures. If the carbon brushes are
sparking excessively, switch off the electric
power tool immediately.
Take your electric power tool to a customer
service centre authorised by the manufacturer.
DH 5 SDS-max