NEC MultiSync LCD1855NX Mode D'emploi page 7

LCD1855NX061102.qxd 6/11/02
Control Panel Functions
Control
PROCESSIN G
AUTO CONFIGU R A TI ON
100
100
CON TRO LS L O CKE D
CO NTR OLS UN LO CKE D
10:43 AM Page 5
Direct Access Function
2
AUTO adjustment function
When adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen Display
(OSD). This will automatically adjust your display image to the
ideal settings for the current screen resolution size (display
mode).
The best display mode is 1280x1024.
3
Bring up Contrast and Brightness adjustment.
5
SOURCE
Use this button to make Dsub or DVI connector active. This fea-
ture is used when two computers are connected to the display.
The default setting is Dsub.
CONTROLS LOCKED/UNLOCKED: MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and button for 3 seconds: the message
"CONTROLS LOCKED" appears.
You can unlock the OSD controls at any time by pushing the
MENU button and button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
5
–continued