Castel XELLIP Serie Mode D'emploi page 27

AUDIO VIDEO IP BLUETOOTH READER DOOR ENTRY STATION
Flush mounting of models with numeric keypad
Make a recess 477mm high, 144mm wide and 65mm deep in the substrate.
Coat the bottom of the recess with at least 10mm of fresh cement.
Insert the bottom of the intercom into the recess and push it in. Allow the base to protrude 2mm.
Allow the cement to dry for at least 24 hours, then connect the door.
Fix the front panel with the 10 FX (TORX) screws with M3 x 10 studs.
To ensure that your intercom is watertight, it is necessary that the front panel, once mounted, rests on the entire seal
between the bottom and the front panel.
Technical data sheet no. 604-0403E
= 50 =
= 155 = 61 2
www.castel.fr
= 70 =
= 40 =
Page 27 / 36
FR
EN