Castel XELLIP Serie Mode D'emploi page 24

AUDIO VIDEO IP BLUETOOTH READER DOOR ENTRY STATION
Surface mounting of models without numeric keypad
Fit the bottom on to the Belt (Option ref. 590.9320) using 4 screws CZ M3 x 6.
Attach the assembly (base + belt) on support by three screws of diameter 3 to 3.5 max.
Connect the entry station.
Attach the front panel with the 8 FX teat screws (TORX) M3 x 10.
To ensure that your intercom is watertight, it is necessary that the front panel, once mounted, rests on the entire seal
between the bottom and the front panel.
Technical data sheet no. 604-0403E www.castel.fr
FR
EN
Page 24 / 36