Télécharger Imprimer la page

Ryobi RY40604 Manuel D'utilisation page 51

Publicité

Les langues disponibles

Les langues disponibles

STARTING AND STOPPING THE
CHAIN SAW
See Figures 9 - 10.
WARNING:
Keep body to the left of the chain line. Never
straddle the saw or chain, or lean over past the
chain line. Improper operation of the chain saw
could result in serious personal injury.
Starting the chain saw:
 Slide and hold the lock-out button. This makes
the switch trigger operational.
 Press and hold the switch trigger, release the
lock-out button and continue to squeeze the
switch trigger for continued operation.
Stopping the chain saw:
 Release the switch trigger to stop the chain saw.
 Upon release of the switch trigger, the lock-out
button will be automatically reset to the lock
position.
This cordless chain saw is designed for limbing and
pruning type cutting, as well as cutting small trees.
PREPARATION FOR CUTTING
PROPER GRIP ON HANDLES
See Figures 11 - 12.
Refer to General Power Tool Safety Rules earlier
in this manual for appropriate safety equipment.
 Wear non-slip gloves for maximum grip and
protection.
 Hold the saw firmly with both hands. Always
keep your left hand on the front handle and your
right hand on the rear handle so that your body
is to the left of the chain line.
WARNING:
Never use a left-handed (cross-handed) grip, or
any stance which would place your body or arm
across the chain line. Improper operation of the
chain saw could result in serious personal injury.
 Maintain a proper grip on the saw whenever
the unit is running. The fingers should encircle
the handle and the thumb is wrapped under the
handlebar. This grip is least likely to be broken
OPERATION
LOCK-OUT
17 - English
BUTTON
CHAIN LINE
SWITCH
TRIGGER
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Publicité

Chapitres

loading