Top View - BIG ASS FANS COOL-SPACE 400 Mode D'emploi

3. Install media and handle
Reinstall the cooling media according to the replacement instructions on the previous page. Attach the handle
to the handle brackets. Before tightening the handle hardware, make sure the space between the cooler and
the handle is even on both sides of the cooler.
15 ft·lb (20.3 N·m)
5/16-18 x 1" Flange
Hex Head Screw
5/16" Flat Washer
5/16-18 Hex Flange
Nylock Nut
Top View
WWW.BIGASSFANS.COM © 2022 DELTA T LLC ALL RIGHTS RESERVED.