Bodet NTP Mode D'emploi page 31

Alternating display between 2 functions on the second line
Select and validate the option (otherwise, select "- -").
Select and validate the following option alternating display "Alt".
Display of the bottom line :
Digital display of the date.
Go into the configuration menu, point "4" (page 32).
Select and validate the first language, then select and validate the option
"DT".
Countdown to an event.
Go into the configuration menu, point "4" (page 32).
Select and validate the first language, then select and validate the option
"EV".
Select the date of this event (year, month, day).
Then select the display mode for this event.
Either fixed validating by FIX or alternated with the date validating by ALT or
alternated with a programmed message validating by ALT PRG.
N.B. when the countdown is finished, the clock returns to displaying the date.
World Clock.
To display the name of a city as a fixture, go into the configuration menu,
point "4" (page 32).
Select and validate the first language, then select and validate the option
"WO".
Select and validate the city.
Then select the display mode fixed or alternated with the date.
To alternate the display between 2 functions, go to point
"4" (page 32).
A single alternating mode is possible, this is why you
cannot display alternating information in 2 languages. But
the alternating display of functions is compatible with the
options (date «DT», event «EV» or world «WO») for the
language selected.
31